See a few projects made with the
machine.
Click here for more info on the
plans
Some pictures during construction
THE PLANS INCLUDE :
Full Material list included, including part numbers, phone numbers, websites. (Some parts may need substitution as part numbers can vary and change over time).
CAD drawn plans printed on 24" X 36" sheets, 11 total.
All drawings are labeled, and dimensioned with many notes to help you.
All the plans are broken down, labeling different assemblies side by side so it is easier to understand.
Pictures during construction that are labeled to make reading the large plan sheets easy. I can email these - this is a large file !!
Labeled pictures of the different machine parts are included in the instruction booklet.
Lots of general information included (ie; drill sizes for various taps, how to tap a hole, locating accurate holes, how to ACCURATELY layout the parts, recommended tools, etc..)
Critical components that need to be machined can be had on disk in DXF form for your machine shop.
Some 3-d drawings are also included. They are are simple drawings of the machine frame, gantry and set up. These drawings help to clear up the 2-d drawings by making it easier to understand since you are looking at it in a 3 dimensional view. The drawings also help understand the various main parts (ie; Gantry upright, X Bearing support< Gantry cross knee, etc...)
If your intention may be to modify the machine - it can be done quite readily because of the gantry design, and drive system - just in case you were wondering.
FOR MORE SEE THE FAQ PAGE !
